Technical B2B ESE lightning arrester solutions featuring Tercel and LEESAS Stormflash models for project enquiry, model comparison and quotation support.
Lightning can create high-current electrical and thermal effects that may damage structures, electrical systems and equipment, and may create dangerous potential differences. A properly engineered lightning protection system uses coordinated air termination, down conductor, bonding, earth termination and surge protection measures to provide defined paths for lightning current and reduce risk to the protected structure and its systems.
Early Streamer Emission (ESE) lightning arrester solutions for industrial, commercial and infrastructure project enquiries.
Early Streamer Emission air terminal solution for project enquiries where ESE technology is specified and accepted by the project consultant or authority.
Tercel Early Streamer Emission (ESE) lightning arrester models for industrial, commercial and infrastructure project enquiries.
Tercel ANS model Early Streamer Emission (ESE) lightning protection air terminal for industrial, commercial and infrastructure project enquiries.
ESE lightning protection product for project-specific applications.
ESE lightning arrester for industrial and infrastructure projects.
Tercel ESE lightning protection solution for engineered projects.
ESE lightning protection system for industrial applications.
Tercel ESE lightning protection product for project requirements.
LEESAS Stormflash Early Streamer Emission (ESE) air terminal technical data for B2B project review, consultant comparison, BOQ preparation and quotation enquiries. Protection radius depends on the Stormflash model efficiency (ΔT), installation height and selected Lightning Protection Level.
| Technical Parameter | Specification |
|---|---|
| Brand / Series | LEESAS ENERTECH – Stormflash |
| Type | Early Streamer Emission (ESE) Air Terminal |
| Triggering Time Advance (ΔT) | 15 μs |
| Applicable Standard | NF C 17-102:2011 / UNE 21186:2011 |
| Material | 304L Stainless Steel (Inox) |
| External Power Supply | Not Required |
| Battery | Not Required |
| Down Conductor Compatibility | Tape/Strip, Round Conductor, Isolated/Insulated Cables/HVSC Cable etc. |
| Warranty | 20 years |
| Mast Height (m) | Level I | Level II | Level III | Level IV |
|---|---|---|---|---|
| 2 | 13 m | 15 m | 18 m | 20 m |
| 3 | 19 m | 22 m | 27 m | 31 m |
| 4 | 25 m | 30 m | 36 m | 41 m |
| 5 | 32 m | 37 m | 45 m | 51 m |
| 6 | 32 m | 38 m | 46 m | 52 m |
| 8 | 33 m | 39 m | 47 m | 54 m |
| 10 | 34 m | 40 m | 49 m | 56 m |
| 20 | 35 m | 44 m | 55 m | 63 m |
| 30 | 35 m | 44 m | 58 m | 69 m |
| 40 | 35 m | 44 m | 60 m | 72 m |
| Technical Parameter | Specification |
|---|---|
| Brand / Series | LEESAS ENERTECH – Stormflash |
| Type | Early Streamer Emission (ESE) Air Terminal |
| Triggering Time Advance (ΔT) | 60 μs |
| Applicable Standard | NF C 17-102:2011 / UNE 21186:2011 |
| Impulse Current Test | 70 kA (8/20 μs) – CPRI (Government of India) tested |
| Material | 304L Stainless Steel (Inox) |
| External Power Supply | Not Required |
| Battery | Not Required |
| Down Conductor Compatibility | Tape/Strip, Round Conductor, Isolated/Insulated Cables/HVSC Cable etc. |
| Warranty | 20 years |
| Mast Height (m) | Level I | Level II | Level III | Level IV |
|---|---|---|---|---|
| 2 | 31 m | 35 m | 39 m | 43 m |
| 3 | 47 m | 52 m | 58 m | 63 m |
| 4 | 63 m | 69 m | 78 m | 85 m |
| 5 | 79 m | 86 m | 97 m | 107 m |
| 6 | 79 m | 87 m | 97 m | 107 m |
| 8 | 79 m | 88 m | 98 m | 108 m |
| 10 | 79 m | 88 m | 99 m | 109 m |
| 15 | 80 m | 89 m | 101 m | 111 m |
| 20 | 80 m | 89 m | 102 m | 113 m |
| 45 | 80 m | 89 m | 105 m | 119 m |
| 50 | 80 m | 89 m | 105 m | 120 m |
| 80 | 80 m | 89 m | 105 m | 120 m |
| 100 | 80 m | 89 m | 105 m | 120 m |
Lightning protection solutions may be required across many types of industrial, commercial and infrastructure facilities.
Protection for industrial buildings, process areas, utilities, warehouses and electrical infrastructure.
External lightning protection coordinated with grounding, bonding and surge protection measures.
Protection requirements for healthcare, educational and institutional buildings and equipment systems.
Large roof-area protection, down conductor routing and grounding arrangements.
Lightning protection for offices, mixed-use buildings, hotels and other commercial facilities.
Protection coordination for solar installations, equipment areas and associated electrical infrastructure.
Project-specific protection systems for infrastructure, transport, terminals and utility facilities.
Multi-building lightning protection, bonding, grounding and maintenance requirements.
B2B and tender projects may require technical data, test reports, drawings, calculations and project-specific approvals.
Product model, material, dimensions, installation information and other relevant technical parameters.
Project teams may require applicable test reports for the specific offered model or component.
Building geometry, installation height and required protection coverage should be reviewed against the selected ESE model and project requirements.
Required approvals and compliance documentation vary by project, authority and tender specification.
Quick guidance for project buyers, consultants and contractors.
It helps intercept lightning, provide defined current paths, manage potential differences through bonding, and coordinate grounding and surge protection measures to reduce risk to structures and systems.
Share building length, width, height, roof layout, site location, required system type, BOQ, tender specification and required documentation.
Yes. Use the WhatsApp Quote button or Inquiry Form on this page and provide product, quantity, application and project location.
Share building dimensions, project location, required system type, BOQ and consultant specification.